I We noticed that the internal blinds are slow to rewind and do not in some cases fully rewind
So having taken them off the van, time to investigate.
At each end of the blind are two screws - remove them to allow the caps to come off
Look inside with a torch to see which end is active - there is a metal rod trapped in the end cap, and which is non active - the roller is just allowed to spin freely
The above image shows the inactive end.
The active end is sprung - keep hold of it to maintain tension!
Keeping the tension on, wind the end to tighten the spring back to allow the blind to fully return.
Secure the active end back on the end cap, and screw the two grub screws back in.
Then reattach the non active end and insert the two grgrub screws
It's that simple - though you do need some spare hands - kindly supplied by my dad in these images.
To refit the blinds reassemble them as a whole on your table - uses string to keep the frames straight and that makes it easier to line everything up on the runners. Once refitted cut and remove the string
